Un RTU relie tout ce qui se trouve sur votre site et envoie rapports et informations au NMS.
Système de répéteurs : Tait, Motorola, Kenwood, Icom et EF Johnson
Monitoring repeaters, such as those from TAIT, MOTOROLA, KENWOOD, ICOM, and EF
JOHNSON, is essential to ensure uninterrupted mission-critical communications. Davicom
RTUs can interface directly with these systems via SNMP (when supported) or through RF
Power Sensors and PTT qualifiers. This allows for precise tracking of forward and
reflected power, enabling early detection of antenna issues, signal degradation, or
equipment failures, before service is disrupted.
AC Power: utility power, generator runtime, fuel levels and transfer switch
Power outages are a top cause of remote site troubles. Davicom RTUs monitor utility
power status and independently verify that switchover to backup sources (like UPS or
generators) has occurred. This dual-check approach ensures no blind spots during outages.
Moreover, Davicom monitors generator runtime, fuel levels, start signals, and transfer
switch status. Through local inputs, SNMP, or Modbus (if the generator controller
supports it), our RTUs confirm proper operation and flag issues immediately, so you're
never left in the dark.
Système d'éclairage de tour
Les règles de sécurité aérienne exigent souvent de connaître en tout temps l'état des feux de tour. Davicom surveille l'état des feux, les photorésistances et le courant afin de détecter les lampes grillées, les problèmes de transition jour-nuit ou les défauts du système. Dès qu'un défaut est détecté, les alarmes partent immédiatement, ce qui vous aide à rester conforme et à réduire votre responsabilité.
Liens hyperfréquences
Microwave backhaul is the backbone of many communication networks. Davicom RTUs can
monitor microwave radios using SNMP or GPIO, depending on equipment capability. Signal
strength, Bit Error Rate (BER) link status, and radio health are tracked in real time,
enabling preemptive maintenance and fast response to outages.
Panneaux de distribution c.c.
Davicom RTUs can connect to DC panels through analog metering, status inputs, or
directly via SNMP if supported. This enables monitoring of individual breaker states,
current levels, and bus voltages. Early detection of anomalies like tripped breakers or
voltage drops helps avoid service interruptions and simplifies power diagnostics.
Uninterruptible Power Supplies (UPS)
With SNMP support, Davicom RTUs integrate effortlessly with network-enabled UPS systems.
You can monitor battery charge, voltage, load percentage, runtime, and fault states,
without adding extra hardware. Whether using SNMP polling or traps, Davicom provides a
full picture of UPS readiness, ensuring critical systems are always protected.
Environmental Sensors: temperature, humidity, smoke, water intrusion
Davicom integrates with a wide range of environmental sensors including temperature,
humidity, smoke, water intrusion, lightning detection, and more. By collecting and
correlating these readings, Davicom RTUs enable true situational awareness and trigger
alarms or automated actions to protect equipment and maintain optimal conditions.
Tableau comparatif des RTU
Compare our RTUs to find the one that best fits your needs.
